• HYGIENIC DESIGN
  • Product Safety
  • Mounts
  • RFID | WIFI | Bluetooth®
  • Service concept

With our products you will easily meet the highest hygienic requirements

The beveled edges and the few special hygienic screws allow an efficient and easy cleaning and desinfection of the HMI - even when you are just wipe-cleaning it.

Furthermore, the V4A stainless steel enclosures are completely protected and comply with IP69k (NEMA 4x) standards. The gap free design and the use of durable materials make the sealing utterly resistant to aggressive detergents, acids and alkalis customary to the food and pharmaceutical industries.

In addition, also all our mounting racks such as support arms, adapters and wall mounts are designed to comply with modern hygiene standards.

Your benefit from our hygienic design:

  • Improved cleaning process
    The gap free design, special hygienic screws and the beveled edges help you to improve and even accelerate your cleaning process. This will reduce your power requirement. Moreover, you can even use less detergents without harming your cleaning result.
  • Higher product quality
    Our hygienic design helps you to reduce the risk of contamination and improve your product quality.

You have questions on the hygienic design of our food and pharma computers? Contact

Highest safety and reliability due specific sectoral development

RFID readers for access control

All our HMI can be equipped with integrated RFID readers such as Legic, Mifare or HiTAG systems. This allows you to implement the HMI easily into company-wide solutions for the administration of rights and access controls.

Registration will be done contactless by using a RFID transponder. Thus access controls can be linked to already existing authentification systems (e.g. personnel time tracking).

Vein scanner for access control

The CAITRON HMI can - in addition to RFID readers - also be equipped with a palm vein scanner. Vein scanners combine extremely low error rates with a contactless device to provide ease of use for all users. Using image recognition and optical technology to scan the normally invisible vein pattern of the palm it is highly resistant to counterfeiting and non-intrusive.

Integrated camera

An integrated camera allows you to take photos during the access control process and compare them with your employee database. Thus unauthorized access can be prevented.

Exclusive use of components suitable for industrial use

For our HMI we exclusively use materials and components that are suitable for industrial use such as the specialized CPU board and the impact-resistant chemically strengthened touch screen. The LED backlight, moreover, contributes to a longer durability of the used display.

Furthermore, we use SSD (Solid State Discs) instead of vibration-susceptible rotating mass storage (HDD).

The risk of humidity and dust entering the inside of the computer and causing technical problems or even failure is dramatically reduced by our completely sealed IP69k (Nema 4x) certified V4A stainless steel enclosure. The protection against this risk is increased by an entirely passive cooling system (i.e. no heat-pipes and no fans).

You have questions regarding our HMI? Contact

Various different mounting systems guarantee an easy installation

Bajonett-System

Due to the bajonett system all CAITRON mounts can be easily installed by just one person.
Put the HMI on the mount - turn - screw down tight - done!

Protected connectors

All mounts also work as protection for the connectors. Therefore, no additional cover is needed to protect the plugs from water or dust. Depending on the mounting system the cables are either entirely inside the mount (tube systems) or have a special IP69k protected cable outlet.

Standard cables - no PG glands needed

The special IP69k cable outlet allows you to use standard cables with all CAITRON mounts. This maximizes your flexibility in integrating the HMI into the IT infrastructure. Furthermore PG glands are no longer needed as our cable outlet complies with IP69k standards.

Hygienic Design

As the mounting racks are made of stainless steel they are very robust. Additionally they are resistant to aggressive detergents, acids and alkalis customary to the industry. The smooth surfaces and beveled edges allow a thorough and effective cleaning.

Various mounts - various possiblities

No matter whether the HMI shall be mounted to a wall, the ceiling or directly to any machine - the various CAITRON mounting systems are the perfect solution.

Any questions on our mounting systems? Contact

Modern touch technology for an easy and efficient operation

RFID readers for access control

All our HMI can be equipped with integrated RFID readers such as Legic, Mifare or HiTAG systems. This allows you to implement the HMI easily into company-wide solutions for the administration of rights and access controls.

Registration will be done contactless by using a RFID transponder. Thus access controls can be linked to already existing authentification systems (e.g. personnel time tracking).

Barcode Scanner (Handheld)

Thanks to the direct Bluetooth(R) connection between the HMI and the barcode scanner no connecting base stations are needed. Thus only the IP65 protected handheld scanner is used inside the high risk area. All base stations can be removed from the actual working place within the high risk area.

Barcode Scanner (Stationary)

Also stationary barcode scanners (e.g. Metrologic IS3480 Quantum E) can be added to the HMI. This allows an improvement in the scanning process as the co-workers have both hands free.

P-CAP Multitouch

The P-CAP multi touch offers an intuitive and convenient operation - similar to common modern touch pads and smartphones. Thus you can use drag & drop and multitouch functionalities such as zooming.

Our P-CAP multi touchs can even be used whilst wearing gloves. The touch sensitivity can be adjusted easily according to individual needs.

Touch pens

The stainless steel touch pens have are suitable for the use in hygienically sensitive areas and allow comfortable and very precise inputs. The touch pens can be fixed to the HMI by a stainless steel cable. In case of loss the touch pens are detectable.

CAITRON Software

The multifunctional button opens the CAITRON Software per default. The software includes a cleaning mode, a numblock and brightness control. Certainly the functionality of the button can be changed to your specific needs.

Any questions on our HMI? Contact

Our service - fast, individual and easy

CAITRON offers individual service whenever you need it.

We are proud to count amongst our service features:

- 24/7-Service hotline

- Immediate replacement

- Individual service concepts

- Free test units

- Vendor managed inventory

Learn more about our service features: Service & Support